Alvesang
Oct 31, 05:48 PM
Wow that's amazing. How much did it cost roughly and how long did it take you to collect so many?
I started collecting DVDs in 2001/2002 (can't really tell exactly) and bought my last one in 2009. Before that I bought laserdiscs (still have a nice collection of those, too). Here in Germany it was quite difficult to get movies without dubbed sound (Germans dub everything) and I absolutely hate not hearing the original actor's voice. We're talking pre-internet era here, early to mid nineties. So I went for (expensively) imported LDs. When DVDs were introduced it was a dream come true. Next to the German dubbing almost every DVD contained the original sound and was much cheaper compared to an LD, plus the picture quality was way better. I sometimes still watch an LD, though, because the analog audiotracks rule. ;)
Summing it up: Nine years, lots of cash, no regrets. Now I'm all digital with a Mac mini and 6TB connected to my flatscreen. It's really comfortable.
I started collecting DVDs in 2001/2002 (can't really tell exactly) and bought my last one in 2009. Before that I bought laserdiscs (still have a nice collection of those, too). Here in Germany it was quite difficult to get movies without dubbed sound (Germans dub everything) and I absolutely hate not hearing the original actor's voice. We're talking pre-internet era here, early to mid nineties. So I went for (expensively) imported LDs. When DVDs were introduced it was a dream come true. Next to the German dubbing almost every DVD contained the original sound and was much cheaper compared to an LD, plus the picture quality was way better. I sometimes still watch an LD, though, because the analog audiotracks rule. ;)
Summing it up: Nine years, lots of cash, no regrets. Now I'm all digital with a Mac mini and 6TB connected to my flatscreen. It's really comfortable.
maverick86
Apr 4, 12:39 PM
The product that Larry reviewed can be found here: http://www.thehishop.com/
They have the back oleo protectors but the front cutout is a single opening and not separate cutouts.
As a side note, when SGP first released their oleophobic protectors they were separate cutouts and somewhere down the line they decided to switch to a single cutout (not sure why).
They have the back oleo protectors but the front cutout is a single opening and not separate cutouts.
As a side note, when SGP first released their oleophobic protectors they were separate cutouts and somewhere down the line they decided to switch to a single cutout (not sure why).
LastLine
Apr 2, 08:40 AM
So I've been thinking
Xcode now requires Snow Leopard - when Lion comes out is it likely I'll need Lion to continue developing or should I be good with Snow Leopard? I only ask as my current development machine is a Core Duo (read - not good enough for Lion) and if I'm going to need to update I'll need to plan ahead.
Whilst I realise nobody 'knows' at the minute, does anyone know when XCode required Snow Leopard from? Was it from Snow Leopard's release, or simply when Xcode 4 came into existance?
Xcode now requires Snow Leopard - when Lion comes out is it likely I'll need Lion to continue developing or should I be good with Snow Leopard? I only ask as my current development machine is a Core Duo (read - not good enough for Lion) and if I'm going to need to update I'll need to plan ahead.
Whilst I realise nobody 'knows' at the minute, does anyone know when XCode required Snow Leopard from? Was it from Snow Leopard's release, or simply when Xcode 4 came into existance?
monsterofNone
Jun 17, 04:16 PM
why exactly did i pay $1500 to attend if they're going to make the videos available free less than a week after the event?
munkery
May 6, 01:06 AM
MacSecurity is a variant of MacDefender.
http://blog.intego.com/2011/05/02/macdefender-rogue-anti-malware-program-attacks-macs-via-seo-poisoning/
http://blog.intego.com/2011/05/02/intego-security-memo-macdefender-fake-antivirus/
You should also be aware of the Weyland-Yutani Bot.
http://m.krebsonsecurity.com/2011/05/weyland-yutani-crime-kit-targets-macs-for-bots/
http://blog.intego.com/2011/05/02/macdefender-rogue-anti-malware-program-attacks-macs-via-seo-poisoning/
http://blog.intego.com/2011/05/02/intego-security-memo-macdefender-fake-antivirus/
You should also be aware of the Weyland-Yutani Bot.
http://m.krebsonsecurity.com/2011/05/weyland-yutani-crime-kit-targets-macs-for-bots/
arn
Nov 16, 02:31 PM
screenshot.
also specify what browser you are using.
also specify what browser you are using.
jbomber
Jul 2, 03:00 AM
Originally posted by iJon
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
Freg3000
Jul 21, 03:43 PM
I just grew out of iMovie and am having a little trouble with FCE. I want to capture video from my Sony DV camera. In iMovie, I would click import, and it would make a new clip every time there was a cut on the original tape. I want to do the same in FCE, but can't figure out how do it. I have imported 1 clip by defining the in and out time codes but that took way to long and is impractical for doing hours of footage that way. What am I missing?
Thanks in advance.
Thanks in advance.
johnnj
Apr 22, 12:47 PM
Awesome...thanks!
So, just to be clear, I need to format the opti-bay drive partition as NTFS so Windows can read it?
You'll need to create a new partition using Disk Utility. Once Win7 is up and running, just reformat it as NTFS.
John
So, just to be clear, I need to format the opti-bay drive partition as NTFS so Windows can read it?
You'll need to create a new partition using Disk Utility. Once Win7 is up and running, just reformat it as NTFS.
John
solarthecat
Sep 8, 08:11 PM
How compatible is this thing with the web?:confused:
Dagless
Mar 20, 12:01 PM
There's nothing to avoid really. It's near the best version of lemmings since the Amiga ones.
A brash thing to say! I'm expecting this to be an inch shy of perfect now.
A brash thing to say! I'm expecting this to be an inch shy of perfect now.
JackT06
Feb 6, 11:00 AM
Thanks for the suggestion. I noticed it has a scheduling feature which is nice and what I've been looking for. I have several other questions in relation to this:
What kind of hardware would I need for this, and what type of internet connection? Would a normal pc or a netbook with an attached higher quality webcam (thinking of going with a higher quality Logitech) be enough? What about bandwidth usage? Wouldn't I need a really fast upload connection if I'm planning on using a direct stream? Cable modem? FIOS? Or is there some service which allows you to stream to them and they relay to your site (similar to Justin.tv or Stream.tv, though I'd prefer not to deal with them in particular)?
I shall try and answer all of these to the best i can, but i can tell you now i'm no possessional on this!(:
I have done this a couple of times now, once just through my built in camera, the quality of the camera, is crap, but when i saw it on the internet i didn't think it was that bad. I have also used a high quality camera (cost me around �50) and the quality was fantastic, did lag at times, but you get that no matter where you go.
So, i would recommend you use an attached camera, but built in ones do work fine.
I'm affraid i don't know the full answer to how much bandwith it was using... HOWEVER, i can tell you that i was uploading it, while on sufering the web, and the effect wasn't that bad. I have also ran it through 3G on my phone, connected to my laptop, and it was OKAY but i couldn't load anything else.
I have allways used a wireless.
Sorry, but i have no experience on the other services, i did try using steam.tv but i got fed up with it.
May i also point out that the audio on it isn't very good.
What kind of hardware would I need for this, and what type of internet connection? Would a normal pc or a netbook with an attached higher quality webcam (thinking of going with a higher quality Logitech) be enough? What about bandwidth usage? Wouldn't I need a really fast upload connection if I'm planning on using a direct stream? Cable modem? FIOS? Or is there some service which allows you to stream to them and they relay to your site (similar to Justin.tv or Stream.tv, though I'd prefer not to deal with them in particular)?
I shall try and answer all of these to the best i can, but i can tell you now i'm no possessional on this!(:
I have done this a couple of times now, once just through my built in camera, the quality of the camera, is crap, but when i saw it on the internet i didn't think it was that bad. I have also used a high quality camera (cost me around �50) and the quality was fantastic, did lag at times, but you get that no matter where you go.
So, i would recommend you use an attached camera, but built in ones do work fine.
I'm affraid i don't know the full answer to how much bandwith it was using... HOWEVER, i can tell you that i was uploading it, while on sufering the web, and the effect wasn't that bad. I have also ran it through 3G on my phone, connected to my laptop, and it was OKAY but i couldn't load anything else.
I have allways used a wireless.
Sorry, but i have no experience on the other services, i did try using steam.tv but i got fed up with it.
May i also point out that the audio on it isn't very good.
haiggy
Oct 2, 08:00 PM
It has been like this for a very long time now.
citizenzen
Jan 9, 12:03 PM
The first thing you need to confirm is that the logo is indeed in vector form when you open it in Illustrator and not just a bounding box indicating pixel-based art.
Toggle the keyboard shortcut Command + Y or go to the pulldown menu View > Outline (or alternatively Preview) to view your art in both modes.
If you have actual vector art, then check the following...
• Pulldown menu Window > Layers - are there any locked layers?
• Pulldown menu Object - is Unlock All in black? That would indicate an object has been locked.
Those would be two things to check.
Toggle the keyboard shortcut Command + Y or go to the pulldown menu View > Outline (or alternatively Preview) to view your art in both modes.
If you have actual vector art, then check the following...
• Pulldown menu Window > Layers - are there any locked layers?
• Pulldown menu Object - is Unlock All in black? That would indicate an object has been locked.
Those would be two things to check.
jessica.
May 2, 07:42 AM
Do you know about forum spy? A topic that is quite active today.
http://forums.macrumors.com/showthread.php?t=1146041
http://forums.macrumors.com/showthread.php?t=1146041
rshanahan
Feb 1, 11:59 AM
This is the most interesting photo of a macbook pro I've ever seen :confused:
Poff
Jan 25, 03:21 AM
aaand a short question..: :)
How does it work with audiobooks?
Say I listen to an audiobook, can I swich and listen to another song for a while, and then return to the audiobook and start where I last stopped? Or do I have to listen to the whole book at once?
How does it work with audiobooks?
Say I listen to an audiobook, can I swich and listen to another song for a while, and then return to the audiobook and start where I last stopped? Or do I have to listen to the whole book at once?
apunkrockmonk
Dec 6, 04:49 PM
Are you sure your computer isn't saying "Could not load MySpace, Reason: It's for 13 year old losers."? ;)
I'm sorry, I can't stand that site.
Myspace is a very very powerful promotional tool for bands. My own band uses it, and I frequently use it to find new music to listen to.
There is more to myspace then 13 year old girls dressing up like sluts and demanding comments.
I'm sorry, I can't stand that site.
Myspace is a very very powerful promotional tool for bands. My own band uses it, and I frequently use it to find new music to listen to.
There is more to myspace then 13 year old girls dressing up like sluts and demanding comments.
nfocus design
Nov 4, 03:54 PM
I have a 23" and haven't had any problems with it. I have seen some pink ones in the store, but mine has been fine. Even if you got one and it was pink, just calibrate it and you should be fine.
MrCommunistGen
Sep 20, 12:23 PM
Is anyone else having trouble getting new WUs? Ever since yesterday I have not been able to get replacement WUs to replace my finished ones on my 2 main computers. I keep on getting a 503 error from the server which I believe means that the server is down... but I just moved to college a couple of days ago and these are my first new WUs since moving so it could be something funny about the internet here. Anyone know what might be going wrong?
Thanks!
mcg
UPDATE: I've been able to get a new WU on one of my two computers here in college, so I don't think its the 'net connection. The other computer still hasn't picked up a WU though... still error 503.
Thanks!
mcg
UPDATE: I've been able to get a new WU on one of my two computers here in college, so I don't think its the 'net connection. The other computer still hasn't picked up a WU though... still error 503.
seb-opp
Apr 17, 05:31 AM
Should a mac pro server have less speed and more grunt, whereas a workstation have more speed and less grunt?
Define 'grunt'
Define 'grunt'
neocell
Sep 20, 02:38 AM
Well crap. Is Hitler back from the dead or something?
:p
Bad joke. I'm tired. Night-night.
This is a good night for random outbursts of laughter. Now that I have spittle all over my PB's screen from this one I can try WillMak's (http://forums.macrumors.com/showthread.php?t=150310) cleansing solution. :D
:p
Bad joke. I'm tired. Night-night.
This is a good night for random outbursts of laughter. Now that I have spittle all over my PB's screen from this one I can try WillMak's (http://forums.macrumors.com/showthread.php?t=150310) cleansing solution. :D
SuperCachetes
Feb 12, 11:45 AM
The iPhone 4 was a failure at launch. The antenna is broken. It drops Internet connections and calls if held a certain. The glass claiming to be strong is weak sauce and the only good things on the phone are the cameras and screen.*
Am I the only one who feels this way?
Have you had trouble with your claws scratching the glass?
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhHq5gC95KQ1Z5g9I8InOfgkjm7xOAPvoudy4OA4fBJP-wLDHraytU_MLhoEh_VBCY-Pmip1NyIsQxy3DnBMCUbFHsohgKHmDRJb8gBcDl_EFwQ3f1Gy6-0I_qeaftKK83nRsZ0cpnAk_E/s320/Troll.jpg
Am I the only one who feels this way?
Have you had trouble with your claws scratching the glass?
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhHq5gC95KQ1Z5g9I8InOfgkjm7xOAPvoudy4OA4fBJP-wLDHraytU_MLhoEh_VBCY-Pmip1NyIsQxy3DnBMCUbFHsohgKHmDRJb8gBcDl_EFwQ3f1Gy6-0I_qeaftKK83nRsZ0cpnAk_E/s320/Troll.jpg
Sykte
Apr 19, 11:50 AM
Something like this should work. You may need to tweak the UIViewAnimationOptions.
[UIView animateWithDuration:0.8 delay:0.0 options:UIViewAnimationOptionCurveEaseInOut | UIViewAnimationOptionAllowUserInteraction animations:^(void) {
popContents.view.frame = CGRectMake(320, ypos-70, 350, 350);
} completion:^(BOOL finished) {
[self.view.superview addSubview:popContents.view];
}];
Don't forget you can nest animations inside of each other.
[UIView animateWithDuration:0.8 delay:0.0 options:UIViewAnimationOptionCurveEaseInOut | UIViewAnimationOptionAllowUserInteraction animations:^(void) {
popContents.view.frame = CGRectMake(320, ypos-70, 350, 350);
} completion:^(BOOL finished) {
[self.view.superview addSubview:popContents.view];
}];
Don't forget you can nest animations inside of each other.
ليست هناك تعليقات:
إرسال تعليق